Enquire for Your Application
— Six Substrates. One Chemistry.

The Right Application For Every Concrete Surface

Roofs, basements, bathrooms, water tanks, exterior walls, terraces — each substrate demands a specific approach. Concrete Shield X SBR is formulated for all six, with measured mixing ratios for each.

Extreme close-up overhead shot of SBR slurry being applied to a flat concrete roof deck, wet coating spreading under a steel trowel, neutral daylight, no shadows
Extreme close-up overhead shot of SBR slurry being applied to a flat concrete roof deck, wet coating spreading under a steel trowel, neutral daylight, no shadows
Angled close-up of a basement wall interior receiving SBR waterproofing coat, worker's brush visible at right edge, damp concrete surface, harsh artificial site lighting, moisture visible on block wall
Angled close-up of a basement wall interior receiving SBR waterproofing coat, worker's brush visible at right edge, damp concrete surface, harsh artificial site lighting, moisture visible on block wall
Overhead close-up of bathroom floor screed being coated with white SBR slurry, tile backer board visible at edge, flat studio strobe lighting, trowel mid-stroke
Overhead close-up of bathroom floor screed being coated with white SBR slurry, tile backer board visible at edge, flat studio strobe lighting, trowel mid-stroke
Wide angled shot inside a concrete water tank under construction, worker applying SBR coating to internal wall surface with a brush, bucket at feet, neutral site daylight from open top
Wide angled shot inside a concrete water tank under construction, worker applying SBR coating to internal wall surface with a brush, bucket at feet, neutral site daylight from open top
Close-up of exterior concrete wall surface receiving SBR plaster coat, trowel held at sharp angle, rough masonry texture visible, overcast daylight, mortar wet and grey
Close-up of exterior concrete wall surface receiving SBR plaster coat, trowel held at sharp angle, rough masonry texture visible, overcast daylight, mortar wet and grey
Overhead environmental shot of a concrete terrace deck mid-application, two workers with rollers applying SBR coating in parallel passes, product buckets at perimeter, harsh midday site light, large open surface
Overhead environmental shot of a concrete terrace deck mid-application, two workers with rollers applying SBR coating in parallel passes, product buckets at perimeter, harsh midday site light, large open surface
/ Where It Works

Application-Specific Performance

Terrace & Roof

Basement Walls

Bathrooms & Wet Areas

Rated for standing water and monsoon ponding. Two-coat application at 2% of cement weight seals hairline cracks and resists hydrostatic uplift.

Formulated for high hydrostatic pressure zones. SBR penetrates the substrate matrix, bonding at a molecular level to block water ingress from below grade.

Applied beneath tile screed to prevent seepage through grout joints. Compatible with all ISI-certified cement mixes; no special primer required.

Underground Water Tanks

Exterior Walls

Terraces & Podiums

Crack-bridging SBR in external plaster resists monsoon-driven rain penetration. Improves plaster adhesion to masonry by measurably increasing tensile bond strength.

High-traffic concrete podiums require flexibility under thermal cycling. SBR-modified mortar accommodates seasonal expansion without delamination or surface cracking.

Non-toxic once cured. Internal tank application at 100 ml per 50 kg cement delivers a continuous membrane resistant to long-term water contact.

Extreme close-up cross-section of a concrete block with SBR waterproofing chemical visibly absorbed into the porous matrix, liquid penetration shown mid-absorption, studio strobe lighting from top, sharp technical framing
Extreme close-up cross-section of a concrete block with SBR waterproofing chemical visibly absorbed into the porous matrix, liquid penetration shown mid-absorption, studio strobe lighting from top, sharp technical framing
+ One Additive. Six Applications.

Same Drum, Every Substrate

Concrete Shield X eliminates multi-product procurement. One 20-litre drum at 100 ml per 50 kg cement covers roofs, tanks, walls, and basements — each application from the same batch, same shelf, same site store.

Shelf life: 24 months. Store away from direct sunlight in a dry location. Use only with ISI-certified cement. No dilution, no pre-mixing of separate components.

Enquire for Your Application

Know Your Surface. Specify With Confidence.

Tell us your substrate, project scale, and location. Our technical team responds with mixing ratios, quantity estimates, and nearest dealer availability.